in

Take Beautiful Pictures of Clothes with Simple Steps

Take Beautiful Pictures of Clothes with Simple Steps

Take Beautiful Pictures of Clothes with Simple Steps

Photos of high quality clothing are essential for online fashion stores. For many customers, the images of their clothing determines whether the customer will buy it or not.

However, “essential” necessarily means “expensive”. The difference between the amateur and the professional is the talent, equipment and experience. If you know photography and have a small budget, follow these 7 steps to take beautiful clothes photos for your online store.

Promote your clothing store with our free image bank!

Burst is a free image bank created by Shopify. Find thousands of product and lifestyle images to use in your store and in your marketing campaigns.

Download free photos

1. Prepare your clothes

Your products must come out flawless in the images. It is unfortunate that clothes get wrinkled or look worn due to storage and transport. Clothes samples are the worst hit, as they are often transported many miles and are sometimes not perfectly produced.

Preparing the clothes to be photographed is a crucial starting point for clothing photography, although many photographers skip this step and rely on Photoshop to fix wrinkles, blemishes and other visible defects. Do not do this. Photoshop isn’t magic: it takes time and experience to master advanced editing techniques, and too much can compromise image quality.

Try to photograph your clothes in perfect condition and use Photoshop only to apply the finishing touches and correct the colors.

Steaming helps to make your product will look flawless in the photo.

Analyze your product in detail, top to bottom, inside and out. Are there tags, stickers and other types of identification materials that need to be removed? Do it. Was the product crushed because it was stored? iron the steam. Make repairs and remove distractions. For example, use a fur roller or masking tape to remove dust and lint.

2. Prepare your studio

Using a few items, you can transform virtually any spacious room into a photo studio. If your budget is very limited, you can get the job done with a camera, tripod, continuous white paper, duct tape, and natural light. If you have a little more to spend and want to control things like when and where to shoot, it’s worth investing in some additional gear.

Studio prepared with camera, tripod, stand, continuous paper, mannequin and lighting kit.

Background

Always use a white or light gray backdrop to avoid distractions and ensure you capture colors as accurately as possible. Continuous rolls of white paper they are perfectly appropriate, inexpensive and always available at any photography store. If you can, use a stand to hold the roll of paper. Unroll the product to the floor so that it curls, avoiding creases and shadows that could cause distraction. Secure it with tape.

Using the stand will give you more flexibility in positioning the background, giving you more room to move around the studio. If your budget is limited, you can attach the continuous roll of paper to the ceiling or some wall.

Position your product on a model or mannequin in the center of the scene and directly in front of your camera’s position.

Camera

Your camera is a key part of your product photo, but don’t make the mistake of thinking it alone will determine your success. She is just one piece of the puzzle, and you don’t need to invest your entire budget in it. We recommend that you use a DSLR camera that has, at the very least, manual exposure control and aperture settings – or even use a very economical alternative at your fingertips: your smartphone!

use a tripod. The stability will prevent camera shake and ensure your shots are consistent, while letting you use your hands for other tasks. You don’t have to spend a lot on a tripod, but it’s vital that you use it.

Position your tripod and camera so that they are directly in front of the product. Most of the time, you will not move the camera during the session. For different product angles, you will only move the product.

Mount the camera on a tripod and position it directly in front of the product.

Lighting

Natural light from an open window is a free, high-quality source for any clothing photographer. If you have a large window and natural light in abundance, great! It might be all you need. However, if at all possible, we highly recommend that you rent or invest in a lighting kit practical.

Having artificial lighting equipment will allow you to take pictures when there is not enough light coming in through the window. This added versatility can greatly increase your efficiency, while consistent lighting will help you set a professional standard. For a single lighting set, you will need a luminaire, softbox, stand, battery kit and sync cable.

The “light fixture” is the light itself. We suggest that you start with a lamp called “monolight”. This is perhaps the most expensive part of your kit – probably more expensive than your camera. So, do some research to find the best long-term option.

a softbox to diffuse the light and capture your product in an equally bright and attractive way. The stand will hold your light fixture and the softbox around it. The sync cable will sync your camera to the light, turning your light fixture into a flash.

3. Position the lighting

If you are using natural light, place your product near a window, where you can get balanced, indirect lighting. If you use a monolight, below is an aerial view diagram of an effective single light setup.

Position the light source and softbox at a 45° angle to the product.

Adjust a light source and softbox, or an umbrella at 45 degrees from the product, so that its lighting is smooth and even throughout. Keep the camera directly in front of the product. If you place it too close to the background, it can create shadows. If this happens, simply move the product further away from the background to let it clean it’s white. Adjust your light source to medium power.

Manually exposing your image properly is often a matter of using the image sensor of your camera, which you can find in the viewfinder, and adjust the setting to leave the meter at the 0 position. It’s not that simple when you use a flash, because there’s no light that the camera can identify until the flash. However, a portable light meter can help you measure light easily and accurately. By synchronizing it to the lighting system and placing it in front of the product, you can ensure accurate readings.

If you don’t have a light meter, start with the speed of your shutter in 1/200 or below that, and your opening at f/11 or above. From there, you’ll need to take a few test shots and adjust your camera settings to get the best exposure and focus.

Allow the required recharge time between flashes. Depending on the strength of your batteries, your light source may not turn on at the correct time if you take shots at short intervals.

4. Style with a mannequin or model

Photographing an outfit on a mannequin or model is the best way to demonstrate the shape and fit of the garment, and encourage customers to visualize themselves wearing the product on display.

Style your product to fit properly.

The models bring the clothes to life, but these professionals are extremely expensive. Mannequins are an affordable and easy-to-work alternative. make time for stylize your product on the dummy. If your outfit looks too big, try adjusting it closer to your dummy, using pins, until it’s arranged properly.

You can create the invisible mannequin effect in post production.

If you’re worried about the mannequin distracting customers or devaluing your product, you can use the technique of invisible mannequin in the post-production process. Some additional photos of your product will allow you to remove the mannequin from the images and present a 3D image capable of showing outline and shape.

5. Adjust your camera

If your camera settings are incorrect, there is no Photoshop that makes your images look professional. Make sure you learn aspects like ISO, opening and balance in white before photographing your products.

Pay close attention to ISO, aperture (F-stop) and white balance.

ISO

Make sure your ISO doesn’t go above 600-640. Higher ISOs produce “noise” or “grain,” which is gray or colored smudges that can be distracting and give photographs a cinematic style. The higher, the greater the grain. At higher ISOs, the camera can’t capture as much sharpness, which is why details start to look softer. Using a tripod will allow you to keep your ISO at 100 or 200 for excellent clarity and sharpness.

Opening

Represented by the number of “efes” (f) in your camera’s settings (eg, f/16, f/2.8), aperture controls focus. In general, the larger the aperture value, the more aspects of the image will be fully in focus. define a aperture greater than f/11; this will allow all aspects of your product to remain fully in focus.

white balance

Have you ever seen a photo that looked like it was taken through a blue or orange filter? White balance was probably off. Light sources contain different levels of heat, creating a play of colors and making it difficult for your camera to determine true white. Your white balance setting controls how the camera interprets registered colors. There are different types of light sources, but the most common are tungsten, fluorescent, LED and natural sunlight.

You can adjust your white balance according to the type of light source you are using, or set it to AUTO and let the camera decide. Whichever you choose, don’t forget about white balance, or you’ll have to accurately recreate colors in Photoshop.

6. Shoot

The moment you’ve been waiting for has finally arrived! Point your camera at the product, press the shutter button halfway, allowing your camera to focus on the item, and then take the picture. If you find your images need more or less light, adjust your camera settings during your session. The more you shoot, the more intuitive your adjustments will become.

Photograph your product from all angles.

Register as many images as you can. Shoot the front and back, 45-degree angles, left and right sides, and any details. The more photos the better. You need lots of options to choose your final images, and having more images per product on websites has been proven to increase sales. Customers will trust their own product reviews if you provide multiple photos from multiple angles.

7. Post-production process

After the photos, it’s time to prepare your product images for the web. THE…

Discover more articles in our categories Fashion & Looks & Luxe et 90s Outfits.

Thanks for visiting we hope our article Take Beautiful Pictures of Clothes with Simple Steps
, we invite you to share the article on Facebook, pinterest and e-mail with the hashtags ☑️ #Beautiful #Pictures #Clothes #Simple #Steps ☑️!

What do you think?

154 Points
Upvote Downvote

Leave a Reply

Your email address will not be published.

Are VW TDI expensive to maintain?

Are VW TDI expensive to maintain?

Why can't Chloe see Dan?

Why can’t Chloe see Dan?