in

How to cut your hair yourself at home: Learn 8 different styles!

How to cut your hair yourself at home: Learn 8 different styles!

How to cut your hair yourself at home: Learn 8 different styles!
🌐

Learning how to cut hair on your own can be quite a challenge – and we, of Everything for Hair, we always reinforce that the ideal is to go to the salon or ask someone to help you.

But if you are willing to cut your own hair at home, know that, following the steps correctly, the chances of getting a good result are great!

If you want to eliminate dry ends, remove the volume or try a new look, learn techniques, tips and tricks to accomplish this mission!

For starters, you need good hair clippers, plastic clips, a fine toothed comb, and one or more large mirrors, plus a room with natural light or a place that has a bright light bulb.

If you want, you can buy a cape to protect your clothes from being cut, or improvise with an old shirt.

How to cut the ends of your hair yourself

If you just want to maintain your hair and cut only the ends, without taking the length, this step by step is for you!

  1. Untangle the hair and divide it in half.
  2. Choose one side and stretch the strands and form a β€œV” with your fingers, bringing it to the height you want to cut.
  3. Clip the hair in the middle of this V and pinch the strands together like tweezers. This way, the wires do not escape when cutting.
  4. Cut the strands below finger height. Make sure your head is straight when cutting so it doesn’t get crooked.
  5. Do the same thing on the other side, making sure both are cut at the same height.

Ready! Well-cut hair and hot, split ends and dry!

Model holds professional scissors in her hands to cut her hair by herself.Photo: iStock

How to cut your hair short yourself

Tired of the long ones and want to shorten your hair a bit? It’s for now! Learn how to cut your hair short with our tutorial:

  1. Untangle the wires.
  2. Divide the hair in half, define the amount you want to cut, and secure both halves with rubber bands, with the height aligned.
  3. Now, just pass the scissors just below the elastic marking to remove the length.
  4. Loosen the hair, comb it again and check if there are any ends left. If the answer is β€œyes”, cut them straight, to get it right.

For the result to be amazing, pay attention when attaching the elastics, that they are 100% aligned.

Oriental model with short hair to her cheeksPhoto: iStock

How to get your hair done

Some people get the impression that the chopped cut makes your hair short, but you actually layer it along the length. Follow the best way to cut your hair by yourself, peaked at the ends:

  1. Throw all the strands to the front of the face and comb with a comb or brush. The ideal is to have wet hair.
  2. Make sure it is completely straight and straight, and cut it straight with scissors.
  3. To peck the tips, run the scissors vertically and make sure the sides are the same length.

To avoid cutting too much, the trick is to start the cut as far away from the back of the head as possible.

Smooth hair model with layered chopped cut on a pink background.The peaked cut creates layers, which makes the strands lighter.

How to cut straight hair myself

The straight cut, also known as blunt cut, is a good trend, right? Check out the tutorial to cut your hair straight.

  1. Divide the hair in half and make a low ponytail at the nape of the neck. Secure with elastic.
  2. Tie another elastic a few inches below the first to mark how much length you plan to take off.
  3. Form a β€œV” with your fingers and bring it to the point where you want to cut your hair. Pinch the hair between your fingers like tweezers.
  4. Cut the strands straight and then loosen the hair to make sure the ends are even.

If it gets crooked at first, no problem: do the β€œV” again with your fingers and repeat the cut, until it is very straight.

Woman with straight blond hair and straight cut, the famous blunt cutPhoto: Reproduction | Instagram @sparizot

How to cut your hair in a V by yourself

The V-cut is characterized by the β€œV” shape at the back of the hair. It’s usually done in long, layered strands, perfect for framing the face. Learn the trick to getting your hair cut easily in a V:

  1. Untangle the strands and try to keep them well aligned.
  2. Separate the hair in half with a comb, dividing it into two parts. Place each part in front of the shoulder.
  3. Secure one of the parts with an elastic band. Take the other part, hold the combed part firmly and cut it straight to the size you want.
  4. Repeat the process on the other side.

If you prefer a sharper cut, the tip is to look at the floor while cutting the threads.

long, straight wire model, in V-cut.This is a great idea for those with long hair. Photo: www.indigitalimages.com

How to cut hair alone in U

The U-shaped cut is a good alternative for those who want to give lightness to the threads and more movement. Check out the best way to cut in U shape in the tutorial below:

  1. Line up the strands with a comb and divide them into two parts.
  2. Choose one of the strands to cut, tilt your head to the side, rotate your neck to the opposite side of what you are about to cut.
  3. Make a straight cut with scissors.
  4. Repeat the same process on the other part.

Remember to measure both sides to make sure they are even and well cut.

Model with medium brown hair for haircut tips storyLearn to cut your hair yourself and lighten your hair

How to cut your chanel hair yourself

Learn how to get a beaked chanel at home with this step-by-step tutorial:

  1. Comb your hair back.
  2. Make a ponytail and tie it with a rubber band close to the back of your head.
  3. Mark out the length you want to cut by tying another elastic band through your hair. You can pass the scissors!
  4. Now release and divide the hair into three parts: two on top (after dividing the hair in half) and one on the nape of the neck. Secure these parts with clamps.
  5. Let go of each of the parts to get the cut at the height you want.

At the back, the tip is to cut the strands at the nape of the neck. On the sides, you can just trim it slightly to make the cut more β€œangular”.

Oriental woman with beaked chanel haircut.Photo: Indigital

how to cut bangs alone

Has the time to cut your bangs come and you’re insecure? Calm down, just follow this simple tutorial:

  1. With a fine-tooth comb, separate your bangs from the rest of your hair.
  2. Slide the comb through the strands and stop at the time you want to cut it.
  3. With the scissors vertically, start cutting the bangs. To do this, use only the tips of the tool.
  4. Start at the middle of the bangs and then go to one side.
  5. Then start again at the center and go to the opposite side.
  6. Re-comb the bangs to make sure all sides are straight. If not, repeat the previous step.

Want to learn more about taking care of your bangs? Check out our complete guide on how to cut your bangs at home.

Blond woman with long, straight hair and bangsPhoto: iStock

Tips and tricks for cutting your own hair

Now that you know a lot about how to get your haircut at home, check out some questions that may arise below.

Is it better to cut dry or wet hair?

Traditionally done with wet hair, haircut can also happen with dry hair. The advantage of cutting with wet hair is that the strands are firmer in the hands, which can be useful for those who are not so experienced with scissors.

In the dry cut, you can instantly see the final length that your hair will have on a daily basis. It is a major advantage for those who want to cut their curly hair at home, since, like the curly hair, it changes a lot in size when wet. You can test which technique makes you safer when cutting.

Woman with straight blond hair at the hairdresser

Is it better to cut dirty or clean hair?

Not sure if you have to wash your hair before cutting? It will depend on the cutting technique you have chosen. If you choose to cut your hair dry, you don’t need to wash it first. But the ideal is that the hair is not washed for many days. For those who are going to cut wet hair, it is recommended to wash and condition the strands before cutting.

Is it better to cut your hair before or after coloring?

If you want to make these two changes, it’s best to cut first and paint later. Thus, you can already see the result of the color in the new hair fall. Another advantage is that you will save ink and time if you follow this order.

However, if the change of look is to lighten the hair a lot with bleach, this process can break part of the strands. For this reason, the cut can be done after painting the locks at home.

Product suggestion

A good haircut makes all the difference in appearance. But to keep it beautiful, the strands need to be clean and hydrated.

Therefore, our tip is the pair of shampoo and Love Beauty and Planet Hope and Repair conditioner, which provides a gentle cleaning and helps to restore the health of the hair, preventing the appearance of split ends.

Shampoo Love Beauty and Planet Hope and Repair

Conditioner Love Beauty and Planet Hope and Repair

For even better results, we also recommend the Love Beauty and Planet Hope and Repair Treatment Mask. As well as the shampoo and conditioner, this darling is formulated with virgin and organic coconut oil + ylang-ylang flower, to provide nutrition, hydration and a healthy appearance to the hair.

Love Beauty and Planet Hope and Repair Treatment Cream

Register your e-mail and receive the latest news, in addition to exclusive discounts!

Find more articles in our categories Hairstyles & Luxe et 90s Outfits.

Thanks for visiting we hope our article How to cut your hair yourself at home: Learn 8 different styles!
, help us and share the article on Facebook, twitter and whatsapp with the hashtags β˜‘οΈ #cut #hair #home #Learn #styles β˜‘οΈ!

What do you think?

154 Points
Upvote Downvote

Leave a Reply

Your email address will not be published.

Why is Louis Vuitton cheaper in Europe?

Why is Louis Vuitton cheaper in Europe?

Is pollution in London bad?

Is pollution in London bad?